Sponsored Links


Results 1 to 1 of 1

Thread: CS501 Advance Computer Architecture FINALTERM paper 2011

  1. #1
    Administrator Vuhelper's Avatar
    Join Date
    Apr 2011
    Posts
    9,578

    Icon51 CS501 Advance Computer Architecture FINALTERM paper 2011

    Sponsored Links1


    FINALTERM EXAMINATION
    Fall 2008
    CS501- Advance Computer Architecture (Session - 1)
    Marks: 75
    Question No: 1 ( Marks: 1 ) - Please choose one
    Which one of the following is the memory organization of SRC processor?
    • 28 * 8 bits
    • 216 * 8 bits
    • 232 * 8 bits
    • 264 * 8 bits
    Question No: 2 ( Marks: 1 ) - Please choose one
    Type A format of SRC uses -----------instructions
    • two
    • three
    • four
    • five
    Question No: 3 ( Marks: 1 ) - Please choose one
    The instruction ---------------will load
    the register R3 with the contents of the memory
    location M [PC+56]
    • Add R3, 56
    • lar R3, 56
    • ldr R3, 56
    • str R3, 56
    Question No: 4 ( Marks: 1 ) - Please choose one
    Which format of the instruction is called the accumulator?
    • 3-address instructions
    • 3-address instructions
    • 2-address instructions
    • 1-address instructions
    • 0-address instructions
    Question No: 5 ( Marks: 1 ) - Please choose one
    Which one of the following are the code size
    and the Number of memory
    bytes respectively for a 2-address instruction?
    • 4 bytes, 7 bytes
    • 7 bytes, 16 bytes
    • 10 bytes, 19 bytes
    • 13 bytes, 22 bytes
    Question No: 6 ( Marks: 1 ) - Please choose one
    Which operator is used to name registers, or part of registers, in the Register
    Transfer Language?
    • :=
    • &
    • %
    • ©
    Question No: 7 ( Marks: 1 ) - Please choose one
    The transmission of data in which each character is self-contained units with its
    own start and stop bits is -----------
    • Asynchronous
    • Synchronous
    • Parallel
    • All of the given options
    Question No: 8 ( Marks: 1 ) - Please choose one
    Circuitry that is used to move data is called -------------
    • Bus
    • Port
    • Disk
    • Memory
    Question No: 9 ( Marks: 1 ) - Please choose one
    Which one of the following is NOT a technique used when the CPU wants to
    exchange data with a peripheral device?
    • Direct Memory Access (DMA).
    • Interrupt driven I/O
    • Programmed I/O
    • Virtual Memory
    Question No: 10 ( Marks: 1 ) - Please choose one
    Every time you press a key, an interrupt is generated.
    This is an example of
    • Hardware interrupt
    • Software interrupt
    • Exception
    • All of the given
    Question No: 11 ( Marks: 1 ) - Please choose one
    The interrupts which are pre-programmed and the processor automatically finds
    the address of the ISR using interrupt vector table are
    • Maskable
    • Non-maskable
    • Non-vectored
    • Vectored
    Question No: 12 ( Marks: 1 ) - Please choose one
    Which is the last instruction of the ISR that is to be executed when the ISR
    terminates?
    • IRET
    • IRQ
    • INT
    • NMI
    Question No: 13 ( Marks: 1 ) - Please choose one
    If NMI and INTR both interrupts occur simultaneously, then which one has the
    precedence over the other
    • NMI
    • INTR
    • IRET
    • All of the given
    Question No: 14 ( Marks: 1 ) - Please choose one
    Identify the following type of serial communication error condition:
    The prior character that was received was not still read by the CPU and is
    over written by a new received character.
    • Framing error
    • Parity error
    • Overrun error
    • Under-run error
    Question No: 15 ( Marks: 1 ) - Please choose one
    ----------the device usually means reading its status register every so often until
    the device's status changes to indicate that it has completed the request.
    • Executing
    • Interrupting
    • Masking
    • Polling
    Question No: 16 ( Marks: 1 ) - Please choose one
    Which I/O technique will be used by a sound card that may need to access data
    stored in the computer's RAM?
    • Programmed I/O
    • Interrupt driven I/O
    • Direct memory access(DMA)
    • Polling
    Question No: 17 ( Marks: 1 ) - Please choose one
    For increased and better performance we use _____ which are usually made of glass.
    • Coaxial Cables
    • Twisted Pair Cables
    • Fiber Optic Cables
    • Shielded Twisted Pair Cables
    Question No: 18 ( Marks: 1 ) - Please choose one
    In _____ if we find some call party busy we can have provision of call waiting.
    • Delay System
    • Loss System
    • Single Server Model
    • None of the given
    Question No: 19 ( Marks: 1 ) - Please choose one
    In ____ technique memory is divided into segments of variable sizes depending upon
    the requirements.
    • Paging
    • Segmentation
    • Fragmentation
    • None of the given
    Question No: 20 ( Marks: 1 ) - Please choose one
    For a request of data if the requested data is not present in the cache, it is called a _____
    • Cache Miss
    • Spatial Locality
    • Temporal Locality
    • Cache Hit
    Question No: 21 ( Marks: 1 ) - Please choose one
    An entire _____ memory can be erased in one or a few seconds which is much faster
    than EPROM.
    • PROM
    • Cache
    • EEPROM
    • Flash Memory
    Question No: 22 ( Marks: 1 ) - Please choose one
    ________chips have quartz windows and by applying ultraviolet light data can be
    erased from them.
    • PROM
    • Flash Memory
    • EPROM
    • EEPROM
    Question No: 23 ( Marks: 1 ) - Please choose one
    The _______signal coming from the CPU tells the memory that some interaction is
    required between the CPU and memory.
    • REQUEST
    • COMPLETE
    None of the given
    Question No: 24 ( Marks: 1 ) - Please choose one
    ______ is a combination of arithmetic, logic and shifter unit along with some
    multiplexers and control unit.
    • Barrel Rotator
    • Control Unit
    • Flip Flop
    • ALU
    Question No: 25 ( Marks: 1 ) - Please choose one
    1. In Multiple Interrupt Line, a number of interrupt lines are provided between the
    ____________________ module.
    • CPU and the I/O
    • CPU and Memory
    • Memory and I/O
    • None of the given
    Question No: 26 ( Marks: 1 ) - Please choose one
    The data movement instructions ___________ data within the machine and to
    or from input/output devices.
    • Store
    • Load
    • Move
    • None of given
    Question No: 27 ( Marks: 1 ) - Please choose one
    CRC has ------------ overhead as compared to Hamming code.
    • Equal
    • Greater
    • Lesser
    • None of the given
    Question No: 28 ( Marks: 1 ) - Please choose one
    The ________ is w-bit wide and contains a data word, directly connected to the data
    bus which is b-bit wide memory address register (MAR) .
    • Instruction Register(IR)
    • memory address register (MAR)
    • memory Buffer Register(MBR)
    • Program counter (PC)
    Question No: 29 ( Marks: 1 ) - Please choose one
    In_______technique, a particular block of data from main memory can be placed in
    only one location into the cache memory .
    • Set Associative Mapping
    • Direct Mapping
    • Associative Mapping
    • Block Placement
    Question No: 30 ( Marks: 1 ) - Please choose one
    _______ indicate the availability of page in main memory.
    • Access Control Bits
    • Used Bits
    • Presence Bits
    • None of the given
    Question No: 31 ( Marks: 1 )
    What are the hardware interrupts in a computer system?Mention its utility.
    Question No: 32 ( Marks: 1 )
    Consider a LAN, using bus topology. If we replace the bus with a switch, what change
    will occur in such a configuration?
    Question No: 33 ( Marks: 2 )
    Where do you find the utility of hardware interrupts in a computer system?
    Question No: 34 ( Marks: 2 )
    Differentiate between CPU register and Cache Memory.
    Question No: 35 ( Marks: 3 )
    Name three important schemes that are commonly used for error control.
    Question No: 36 ( Marks: 3 )
    What do you understand by the term data synchronization ?
    Explain briefly the following schemes of data synchronization in your own words
    Synchronous transmission
    Asynchronous transmission
    Question No: 37 ( Marks: 3 )
    Differenciate between Spatial Locality And Temporal Locality .
    Question No: 38 ( Marks: 5 )
    Given a 16-bit parallel output port attached with the FALCON-A CPU as shown in the figure. The
    port is mapped onto address DEh of the FALCON-A s I/O space. Sixteen LED branches are
    used to display the data being received from the FALCON-A s data bus. Every LED branch is
    wired in such a way that when a 1 appears on the particular data bus bit, it turns the LED on; a 0
    turns it off.
    Which LEDs will be ON when the instruction
    out r2, 222
    executes on the CPU? Assume r2 contains 1234h.
    Question No: 39 ( Marks: 5 )
    Consider a 4 way set-associative cache with 256KB capacity and 32 byte lines
    a) How many sets are there in the cache?
    b) How many bits of address are required to select a set in cache?
    Question No: 40 ( Marks: 10 )
    Describe the following features of FALCON-A Assembler
    Symbol Table
    I/O Ports
    List File
    Single Step
    Error Log
    Question No: 41 ( Marks: 10 )
    How many platters are required for a 40GB disk if there are 1024
    bytes/sector, 2048 sectors per track and 4096 tracks per platter
    How many platters are required for a 80GB disk if there are 1024
    bytes/sector, 2048 sectors per track and 4096 tracks per platter


    Sponsored Links
    Attached Files Attached Files

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 07-10-2011, 08:46 PM
  2. Replies: 1
    Last Post: 04-19-2011, 03:26 AM
  3. Replies: 0
    Last Post: 01-23-2011, 02:57 PM
  4. Replies: 0
    Last Post: 12-05-2010, 05:52 PM
  5. Replies: 0
    Last Post: 07-17-2010, 06:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
-: Vuhelp Disclaimer :-
None of the files shown here are hosted or transmitted by this server. The links are provided solely by this site's users. The administrator's or staff of Vuhelp.net cannot be held responsible for what its users post, or any other actions of its users. You may not use this site to distribute or download any material when you do not have the legal rights to do so. It is your own responsibility to adhere to these terms. If you have any doubts about legality of content or you have any suspicions, feel free to contact us.
Online Education | JhelumSoft