PTCL Broad band pakistan ADSL Installation Guide ZTE – ZXDSL-831D 2011

[Xpert]

View more random threads:

• I'm having some trouble installing my EVO 3G
• GPRS Setting FOR ALL QMobile Handsets in Pakistan 2011
• Samsung Introduces “Virus Doctor” Air-Conditioners July 2011
• PTCL Vfone is CDMA prepaid and postpaid customers package...
• Qubee Introduces 1.5 Mbps Unlimited 2011
• Wateen WiMAX Broadband information and manuall download
• Check Online Karachi Railway Enquiry Phone Numbers
• What is the validity of Evo Max Package
• ptcl Broadband WiFi on our phone 2011
• latest Samsung Smart TV’s 3D Video-On-Demand hit 1M...

PTCL introduces DSL service for our valued subscribers. We are committed to
provide you quality internet services. Please follow the installation instructions and
log on to your ADSL broadband link.
Step 1: Connecting to the Splitter, Power Connection & LAN cable.
1 Line hole connects to PTCL wire or Wall phone Jack (RJ-11 Jack).
2 Modem hole connects to the DSL jack of the ADSL CPE (Customer Premises
Equipment).
3 Phone hole connects to a telephone set.
4 Connect the Power Adapter to the AC power plug and attach the connector of
adapter to the CPE and switch it on.
5 Attach one end of LAN wire (RJ-45) to the LAN interface of CPE and the other
end to the LAN wire to the LAN interface of computer’s LAN card.
6 Link Indicator lights will lit up and show the connectivity. ADSL light will start
blinking and soon will be static as a sign of connectivity with our system, if the
line is properly jumpered in PTCL premises with the DSLAM (Digital
Subscriber Line Access Multiplexer).Joint less and direct cable line from the
nearest PTCL pole or cabinet must be connecting to your splitter and then all
the phone extensions must be taken from the phone hole of splitter. The Drop
wire distance from PTCL pole or Cabinet must not be ideally more than 50
meters.(Twisted pair wire can be longer)
Step 2: ADSL Configuration in CPE and Computer
1. Go to Start Menu < Control Panel < Network and Internet Connections < Network
Connections. Check that the Local Area Connection is enabled. Right click local
Area network and click properties. Following window will be shown.

ADSL Configuration in CPE and Computer.jpg
2. Double click “internet protocol (TCP/IP)”, Check “Use the following IP
address” and make the following settings:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Then, check “Use the following DNS server addresses” and make
the following settings:
Preferred DNS Server: 203.99.163.240
Alternate DNS Server: 203.135.0.170
ip.jpg
3. Now open Internet Explorer and write “192.168.1.1” in address bar and press
enter. There must not be any proxy setting in the internet Explorer.
Untitled1.jpg
A small pop up window will open as shown in the figure below and ask ”User Name”
and “Password” for opening the CPE’s interface.
Enter User Name: ZXDSL and Password: ZXDSL and press OK.
Note: “Both username & password must be written in capital letters.”
ZXDSL.jpg
4. CPE configuration will be opened. This will show Modem Status. Click the
Connection Setting.
Connection Setting..jpg
5. Connection Settings show current active connection as shown in the figure. Click
create new connection service
create new connection service.jpg
6. In create new connection window. Select “PPP over Ethernet”
PPP over Ethernet.jpg
7. Enter VPI=0 and VCI=103 for Copper number & VPI=8 and VCI=81 for ONU Fiber
Optics number. Select Authentication protocol as “PAP” and enter username and
Password. Click “Create this new service”.
“PAP.jpg
8. Now Connection settings window will be opened and shows current active
connections
Connection settings.jpg
9. Click Advance settings and then on Security .Security Interface Configuration is
shown. Click Add Interface.
Advance settings.jpg
10. Following figure will be shown. Click Apply.

Sponsored Links

[Xpert]

Click Apply.jpg
11. Security Interface Configuration will be opened. Click Enable NAT to interface.
Enable NAT to interface.jpg
12. Following window will be opened
window opened..jpg
13. Click System Settings and then on DHCP Server. In DHCP Server Configuration,
Click on Enable DHCPServer and Apply
DHCPServer.jpg
14. Click on ADSL. ADSL Configuration Window will be opened. Select Standard:
G.DmtBisPlus and ActiveLine: Start. Click Startup.
ADSL.jpg
15. Click Maintenance and then on save. In save configuration, click save
Maintenance.jpg
16. Finally, save configuration will be completed showing the following window.
Untitled 3.jpg
17. Now restart the Router. Click on Restart.
Restart..jpg
18. Go again to Internet Protocol (TCP/IP) Properties and Select Obtain an IP address
automatically and leave the DNS server addresses unchanged as shown in the picture
below and press Ok.
Now,
r2.jpg
Now, open the Internet Explorer and start browsing the sites for successful configuration and
DSL connection establishment.