CS501 Advance Computer Architecture Quiz No1 Solution IdeasView more random threads:
- CS401 Computer Architecture and Assembly Language Quiz No.2...
- STA630 Quiz 3 (June 2010)
- MGT503 Principles of Management Quiz No.1 Fall 2014 Close...
- PSY631 - Psychological Testing & Measurements Assignment...
- CS506 Web Design and Development quiz for 22 november 2010
- ECO402 Microeconomics Quiz No. 01 Spring Fall 2014 Solutions
- cs402 theory of automata's current quiz 19th April 2011
- MGT101 Financial Accounting Quiz No.1 Solution Ideas last...
- MGT402 Quiz 4th Announcement 20 July 2010
- STA 630 Approx. 267 solved MCQ’s May 3,2010 Part 1
For any of the instructions that are a part of the instruction set of the SRC, there are cerain_________required; which may be used to select the appropriate function for the ALU to be performed, to select the appropriate registers, or the appropriate memory location.
- Register
- Control signals
- Memory
- None of the given
Q 2 FALCON-A processor bus has 16 lines or is 16-bits wide while that of SRC _____wide.
- 8-bits
- 16-bits
- 32-bits
- 64-bits
Q 3 What is the instruction length of the FALCON-A processor
- 8-bits
- 16-bits
- 32-bits
- 64-bits
Q 4 _________control signals enable the input to the PC for receiving a value that is currently on the internal processor bus.
- LPC
- INC4
- LC
- I
Q 5 Which one of the following is a bi-stable device, capable of storing one bit of information?
- Decoder
- Flip-Flop
- Multiplexer
- Diplexer
Q 6 Which instruction is used to store register to memory using relative address?
- ld instruction
- ldr instruction
- lar instruction
- str instruction
Q 7 Which field of the machine language instruction is the “type of operation” that is to be performed?
- Op-code (or the operation code)
- CPU registers
- Momory cells
- I/O locations
Q 8 The instruction ___________ will load the register R3 with the contenets of the m\emory location M [PC+56]
___Add R3, 56
___lar R3, 56
___ldr R3, 56
___str R3, 56
Q 9 _______ operation is required to change the processor’s state to a known, defined value.
- Change
- Reset
- Update
- None of the given
Q 10 which type of instructions help in changing the flow of the program as and when required?
- Arithmetic
- Control
- Data transfer
- Floating point
Sponsored Links
There are currently 1 users browsing this thread. (0 members and 1 guests)