FINALTERM EXAMINATION
Spring 2009
CS302- Digital Logic Design

Question No: 1 ( Marks: 1 ) - Please choose one
The diagram given below represents __________



cs301 1.jpg


► Demorgans law
► Associative law
► Product of sum form
► Sum of product form

Question No: 2 ( Marks: 1 ) - Please choose one
Excess-8 code assigns _______ to “+7”


► 0000
► 1001
► 1000
► 1111

Question No: 3 ( Marks: 1 ) - Please choose one
NOR gate is formed by connecting _________


► OR Gate and then NOT Gate
► NOT Gate and then OR Gate
► AND Gate and then OR Gate
► OR Gate and then AND Gate

Question No: 4 ( Marks: 1 ) - Please choose one
A full-adder has a Cin = 0. What are the sum (<PRIVATE "TYPE=PICT;ALT=sigma"> ) and the carry (Cout) when A = 1 and B = 1?




= 0, Cout = 0
= 0, Cout = 0
► = 0, Cout = 1
► = 1, Cout = 0
► = 1, Cout = 1

Question No: 5 ( Marks: 1 ) - Please choose one
A particular half-adder has

► 2 INPUTS AND 1 OUTPUT
► 2 INPUTS AND 2 OUTPUT
► 3 INPUTS AND 1 OUTPUT
► 3 INPUTS AND 2 OUTPUT

Question No: 6 ( Marks: 1 ) - Please choose one
THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT __________ GATE


► AND
► OR
► NAND
► XOR

Question No: 7 ( Marks: 1 ) - Please choose one
A FIELD-PROGRAMMABLE LOGIC ARRAY CAN BE PROGRAMMED BY THE USER AND NOT BY THE MANUFACTURER.



► TRUE
► FALSE

Question No: 8 ( Marks: 1 ) - Please choose one
FLIP FLOPS ARE ALSO CALLED _____________

► BI-STABLE DUALVIBRATORS
► BI-STABLE TRANSFORMER
► BI-STABLE MULTIVIBRATORS
► Bi-stable singlevibrators

Question No: 9 ( Marks: 1 ) - Please choose one
A POSITIVE EDGE-TRIGGERED FLIP-FLOP CHANGES ITS STATE WHEN ________________

► LOW-TO-HIGH TRANSITION OF CLOCK
► HIGH-TO-LOW TRANSITION OF CLOCK
► ENABLE INPUT (EN) IS SET
► PRESET INPUT (PRE) IS SET

Question No: 10 ( Marks: 1 ) - Please choose one
___________ IS ONE OF THE EXAMPLES OF SYNCHRONOUS INPUTS.

► J-K INPUT
► EN INPUT
► Preset input (PRE)
► CLEAR INPUT (CLR)

Question No: 11 ( Marks: 1 ) - Please choose one
THE GLITCHES DUE TO RACE CONDITION CAN BE AVOIDED BY USING A ___________

► GATED FLIP-FLOPS
► PULSE TRIGGERED FLIP-FLOPS
► POSITIVE-EDGE TRIGGERED FLIP-FLOPS
► NEGATIVE-EDGE TRIGGERED FLIP-FLOPS

Question No: 12 ( Marks: 1 ) - Please choose one
THE DESIGN AND IMPLEMENTATION OF SYNCHRONOUS COUNTERS START FROM _________


► TRUTH TABLE
► K-MAP
► STATE TABLE
► STATE DIAGRAM

Question No: 13 ( Marks: 1 ) - Please choose one
THE HOURS COUNTER IS IMPLEMENTED USING __________

► ONLY A SINGLE MOD-12 COUNTER IS REQUIRED
► MOD-10 AND MOD-6 COUNTERS
► MOD-10 AND MOD-2 COUNTERS
► A SINGLE DECADE COUNTER AND A FLIP-FLOP

Question No: 14 ( Marks: 1 ) - Please choose one
GIVEN THE STATE DIAGRAM OF AN UP/DOWN COUNTER, WE CAN FIND __________



► THE NEXT STATE OF A GIVEN PRESENT STATE
► THE PREVIOUS STATE OF A GIVEN PRESENT STATE
► BOTH THE NEXT AND PREVIOUS STATES OF A GIVEN STATE
► The state diagram shows only the inputs/outputs of a given states

Question No: 15 ( Marks: 1 ) - Please choose one
In ________ outputs depend only on the current state.


► Mealy machine
► MOORE MACHINE
► STATE REDUCTION TABLE
► STATE ASSIGNMENT TABLE

Question No: 16 ( Marks: 1 ) - Please choose one
A SYNCHRONOUS DECADE COUNTER WILL HAVE _______ FLIP-FLOPS

► 3
► 4
► 7
► 10


Question No: 17 ( Marks: 1 ) - Please choose one
A MULTIPLEXER WITH A REGISTER CIRCUIT CONVERTS _________


Sponsored Links


► SERIAL DATA TO PARALLEL
► PARALLEL DATA TO SERIAL
► Serial data to serial
► PARALLEL DATA TO PARALLEL

Question No: 18 ( Marks: 1 ) - Please choose one
The alternate solution for a multiplexer and a register circuit is _________



► PARALLEL IN / SERIAL OUT SHIFT REGISTER
► SERIAL IN / PARALLEL OUT SHIFT REGISTER
► PARALLEL IN / PARALLEL OUT SHIFT REGISTER
► SERIAL IN / SERIAL OUT SHIFT REGISTER

Question No: 19 ( Marks: 1 ) - Please choose one
AT T0 THE VALUE STORED IN A 4-BIT LEFT SHIFT WAS “1”. WHAT WILL BE THE VALUE OF REGISTER AFTER THREE CLOCK PULSES?


► 2
► 4
► 6
► 8

Question No: 20 ( Marks: 1 ) - Please choose one
A 8-BIT SERIAL IN / PARALLEL OUT SHIFT REGISTER CONTAINS THE VALUE “8”, _____ CLOCK SIGNAL(S) WILL BE REQUIRED TO SHIFT THE VALUE COMPLETELY OUT OF THE REGISTER.

► 1
► 2
► 4
► 8

Question No: 21 ( Marks: 1 ) - Please choose one
5-BIT JOHNSON COUNTER SEQUENCES THROUGH ____ STATES

► 7
► 10
► 32
► 25

Question No: 22 ( Marks: 1 ) - Please choose one
IN ________ Q OUTPUT OF THE LAST FLIP-FLOP OF THE SHIFT REGISTER IS CONNECTED TO THE DATA INPUT OF THE FIRST FLIP-FLOP OF THE SHIFT REGISTER.


► MOORE MACHINE
► Meally machine
► Johnson counter
► Ring counter

Question No: 23 ( Marks: 1 ) - Please choose one
DRAM STANDS FOR __________



► DYNAMIC RAM
► Data RAM
► Demoduler RAM
► None of given options

Question No: 24 ( Marks: 1 ) - Please choose one
IF THE FIFO MEMORY OUTPUT IS ALREADY FILLED WITH DATA THEN ________



► IT IS LOCKED; NO DATA IS ALLOWED TO ENTER
► IT IS NOT LOCKED; THE NEW DATA OVERWRITES THE PREVIOUS DATA.
► PREVIOUS DATA IS SWAPPED OUT OF MEMORY AND NEW DATA ENTERS
► NONE OF GIVEN OPTIONS

Question No: 25 ( Marks: 1 ) - Please choose one
LUT is acronym for _________



► LOOK UP TABLE
► LOCAL USER TERMINAL
► LEAST UPPER TIME PERIOD
► NONE OF GIVEN OPTIONS

Question No: 26 ( Marks: 1 ) - Please choose one
______ OF A D/A CONVERTER IS DETERMINED BY COMPARING THE ACTUAL OUTPUT OF A D/A CONVERTER WITH THE EXPECTED OUTPUT.



► RESOLUTION
► Accuracy
► Quantization
► Missing Code

Question No: 27 ( Marks: 1 ) - Please choose one

cs301 2.jpg

In the circuit diagram of 3-bit synchronous countershown above, The red rectangle would be replaced which gate?


► AND
► OR
► NAND
► XNOR

Question No: 28 ( Marks: 1 ) - Please choose one
WHEN BOTH THE INPUTS OF EDGE-TRIGGERED J-K FLOP-FLOP ARE SET TO LOGIC ZERO _________


► THE FLOP-FLOP IS TRIGGERED
► Q=0 AND Q’=1
► Q=1 AND Q’=0
► THE OUTPUT OF FLIP-FLOP REMAINS UNCHANGED

Question No: 29 ( Marks: 1 ) - Please choose one
A FREQUENCY COUNTER ______________


► Counts pulse width
► COUNTS NO. OF CLOCK PULSES IN 1 SECOND
► Counts high and low range of given clock pulse
► NONE OF GIVEN OPTIONS


Question No: 30 ( Marks: 1 ) - Please choose one
Stack is an acronym for _________


► FIFO memory
► LIFO memory
► Flash Memory
► Bust Flash Memory

Question No: 31 ( Marks: 1 )
What is the role of MOS transistor in Mask ROM.



Question No: 32 ( Marks: 1 )
THE GROUP OF BITS 10110111 IS SERIALLY SHIFTED (RIGHT-MOST BIT FIRST) INTO AN 8-BIT PARALLEL OUTPUT SHIFT REGISTER WITH AN INITIAL STATE 11110000. WHAT WILL BE THE CONTENTS OF REGISTER AFTER TWO CLOCK PULSES THE REGISTER CONTAINS?



Question No: 33 ( Marks: 2 )
DRAW THE CIRCUIT DIAGRAM OF GATED S-R LATCH.



Question No: 34 ( Marks: 2 )
HOW MANY BYTES WILL BE THERE IN 32 K X 4 MEMORY?

32 X 1024BYTES X 4 = 131072 BYTES

Question No: 35 ( Marks: 3 )
THE ________ OF FIRST 74HC163 COUNTER IS CONNECTED TO _______ AND ________ INPUTS OF OTHER 74HC COUNTER TO FORM A SINGLE CASCADED COUNTER




Question No: 36 ( Marks: 3 )
GIVEN THE FOLLOWING STATEMENT USED IN PLD PROGRAMMING:
Y PIN 23 ISTYPE ‘COM’;
Explain what does this statement mean?

VARIABLE Y AT OUTPUT PIN 23 WHICH IS A COMBINATIONAL OUTPUT AVAILABLE DIRECTLY FROM THE AND-OR GATE ARRAY OUTPUT.

Y = VARIABLE Y
PIN 23 = PIN NUMBER 23
ISTYPE “COM” = OUTPUT TYPE COMBINATIONAL


Question No: 37 ( Marks: 3 )
WHAT IS MEMORY EXPANSION PROCESS?



Question No: 38 ( Marks: 5 )
CONSIDER THE TABLE GIVEN BELOW, APPLY THE STATE REDUCTION PROCESS ON THE STATES GIVEN IN THE TABLE AND REDUCE THE NUMBER OF STATES AS MUCH AS POSSIBLE.


cs301 3.jpg

Question No: 39 ( Marks: 5 )
PERFORMANCE CHARACTERISTICS OF D/A CONVERTERS ARE DETERMINED BY FIVE PARAMETERS. NAME THEM.


Question No: 40 ( Marks: 10 )
GIVEN BELOW IS THE CIRCUIT DIAGRAM OF BI-DIRECTIONAL 4-BIT SERIAL IN/SERIAL OUT SHIFT REGISTER. REGISTER SHIFTS DATA LEFT OR RIGHT DEPENDS ON THE SIGNAL APPLIED. EXPLAIN HOW THIS CIRCUIT SHIFTS DATA LEFT AND RIGHT.

Question No: 41 ( Marks: 10 )
BRIEFLY EXPLAIN ADDRESS MULTIPLEXING IN DRAM.